Sparkoz TN70-PRO industrial floor scrubber: disc or cylindrical brush

The TN70-PRO is Sparkoz's industrial floor scrubber robot, available through Tovrana in two versions. Both clean 21,960 square feet an hour on an 18.5 gallon tank with Never-Lost (TM) navigation; the brush decides which floor it suits best.

Pick the brush for your floor.

Same chassis, tanks, squeegee and navigation. Compare the TN70-PRO with the compact TN10-PRO.

For polished floorsSparkoz TN70-PRO disc brush version

Sparkoz TN70-PRO Disc brush

A 20 inch magnetic disc with about 60 lbs of down pressure polishes as it scrubs: sealed concrete, vinyl, terrazzo and stone in retail, transit halls and terminals. Up to 3.6 hours of scrubbing per charge.

MSRP $32,350
Industrial autonomous floor scrubber

What both versions share.

21,960sq ft/h
Cleaning efficiency
18.5gal
Solution tank
13.2gal
Recovery tank
32in
Squeegee width
75 to 80dB
Operating noise
2.68mph
Maximum speed

Specifications per Sparkoz and subject to change. Contact Tovrana to confirm current specifications for your configuration.

MSRP $32,350 disc, $33,350 cylindrical

MSRP $32,350 for the disc brush version and $33,350 for the cylindrical brush version. Charging options are confirmed on your quote. The optional TN70W refill and drain workstation is $3,600 MSRP; the automatic charging dock is priced on your quote. Installation is quoted separately for your site, and plumbing for the workstation is quoted per job. Available to buy, finance, or lease over 24 to 63 months with other lengths on request, payment quoted with your proposal. Contact us for other lease lengths. See robot leasing.

Sparkoz TN70-PRO autonomous floor scrubber in a hospital outpatient hall

Start on the plug-in charger, add the rest when you are ready.

Start here

Plug-in charger

The simplest start on either version, confirmed on your quote. Add the dock or workstation when the site is ready.

Optional, on quote

Charging dock

The robot returns and recharges on its own between missions. About 17.7 x 13.8 x 21.7 in.

Optional, $3,600 MSRP

TN70W workstation

Charging plus automatic refill and drain. About 23.6 x 19.3 x 26 in; needs a water supply and a drain, plumbing quoted per job.

Optional

3D LiDAR

For the busiest, most reflective or most cluttered floors, on top of the standard Never-Lost (TM) navigation.

Optional, on quote

Disinfectant Fogger

Mounts on the TN70-PRO and mists disinfectant from four outlets as the robot runs its route, fed by its own 6.5 L tank. Add it at purchase or later.

Optional, on quote

Warehouse Safety Spotlight

A blue beam on the floor ahead and red light bars along each side, so people and forklift drivers see the robot coming.

Optional, on quote

Quiet glide dust mop

A 36 inch dust mop for dry passes on days the floor only needs dusting.

Sparkoz TN70-PRO technical specifications, both versions

SpecificationSparkoz TN70-PRO
TypeAutonomous floor scrubber, disc brush or cylindrical brush version
Dimensions45.7 x 22.8 x 47.6 in (116 x 58 x 121 cm)
Weight, empty439 lbs (199 kg) cylindrical; disc weight confirmed on your quote
Cleaning efficiency21,960 sq ft/h (2,040 sq m/h)
Cleaning width20.5 in (52 cm) dual roller cylindrical; 20 in (51 cm) magnetic disc
Down pressureAbout 55 lbs cylindrical; about 60 lbs disc
Squeegee width32 in (81 cm)
Solution tank18.5 gal (70 L)
Recovery tank13.2 gal (50 L)
Trash bin2 L
Noise75 to 80 dB
BatteryDC 25.6 V, 100 to 120 Ah
RuntimeUp to 3.6 h scrub on both versions; 12 h dust mop (cylindrical)
Climbing6%
Maximum speed2.68 mph (1.2 m/s)
NavigationNever-Lost (TM) 360 degree navigation standard, optional 3D LiDAR
Charging and waterPlug-in charger, charging dock or TN70W workstation, confirmed on your quote; the workstation adds automatic refill and drain, plumbing quoted per job
SoftwareSparkoz software with mission scheduling

Specifications per Sparkoz and subject to change. Contact Tovrana to confirm current specifications for your configuration.

Frequently asked questions