PUDU CC1 Robotic Floor Scrubber and Commercial Cleaning Robot
The proven autonomous four in one cleaning robot. The CC1 sweeps, scrubs, vacuums, and dust mops in a single machine, covering large commercial floors on its own while your team focuses on work that needs a human.
One robot that replaces four machines.
The CC1 brings sweeping, scrubbing, vacuuming, and dust mopping together in one autonomous machine. Dual 15 liter tanks keep clean and recovery water separate, a 500 mm sweeping path covers ground quickly, and LiDAR with visual positioning lets it map and navigate busy spaces without QR codes or markers on the floor. It is the dependable workhorse of the CC1 family, while the CC1 Pro adds a rear AI camera for cleaning quality monitoring on top of everything the CC1 does.
Specifications per PUDU Robotics and subject to change. Contact us to confirm current specifications for your configuration.
Available to buy, finance, or lease over 24 to 63 months. Contact us for other lease lengths. See robot leasing.
Sweep, scrub, vacuum, and dust mop in one pass.
Most facilities juggle several machines and several operators to cover different floor jobs. The CC1 folds all four into one autonomous robot. It sweeps debris, scrubs with water and solution, vacuums up the dirty water, and dust mops, switching modes on its own so a whole property is handled by a single machine running a planned route.
- Sweeping, scrubbing, vacuuming, and dust mopping in one autonomous unit
- Dual 15 liter tanks keep clean water and recovery water fully separate
- Side brushes pull dirt from edges, corners, and baseboards
- Resumes the exact spot it left off after recharging
Maps your space and cleans it without markers.
PUDU SLAM combines LiDAR and visual positioning so the CC1 builds a map of your floors and navigates around people, furniture, and changing layouts on its own. There are no QR codes or ceiling markers to install. With an optional docking station and mobile water station it recharges, refills, and drains by itself for hands off operation.
- LiDAR and visual SLAM positioning for complex, busy environments
- Cleans tile, marble, epoxy, stone, and low pile carpet
- Optional docking station adds automatic charging, water fill, and drain
- Cleaning reports show area, time, and status after every run
The CC1 cleaning range on the floor.
* Footage shows the CC1 Pro, a closely related model in the same cleaning range.
The optional Self-Cleaning Docking Station automates charging, water fill, drainage, and brush cleaning.
PUDU CC1 technical specifications
| Specification | PUDU CC1 |
|---|---|
| Cleaning type | Four in one: sweeping, scrubbing, vacuuming, and dust mopping |
| Dimensions | 629 x 552 x 695 mm |
| Weight | 75 kg |
| Sweeping width | 500 mm |
| Scrubbing width | About 380 mm |
| Cleaning efficiency | 700 to 1,000 square meters an hour |
| Clean water tank | 15 L |
| Recovery tank | 15 L |
| Charging time | Under 3 h |
| Run time | 3 to 9 h depending on mode |
| Cruise speed | 0.2 to 1.2 m/s |
| Minimum clearance | 70 cm |
| Display | 10.1 inch touch screen |
| Navigation | PUDU SLAM, visual and LiDAR positioning |
| Operating noise | Under 70 dB |
| Charging and water | Auto recharge, fill, and drain with optional docking station |
For large commercial floors that need consistent daily care.
Shopping malls
Covers wide concourses overnight so floors are ready before doors open.
Hospitals and clinics
Consistent, documented cleaning across long corridors and waiting areas.
Offices and campuses
Frees cleaning staff from routine floor work to focus on detail tasks.
Step up to the CC1 Pro
Need cleaning quality monitoring and heat maps? The CC1 Pro adds a rear AI camera.
CC1 or CC1 Pro: what the Pro adds
Both robots share the same four in one design, sweeping, scrubbing, vacuuming, and dust mopping, with dual 15 liter tanks and a 500 mm sweeping path. The PUDU CC1 Pro adds a rear AI camera for cleaning quality monitoring and heat maps, for sites that need proof of every run. If you want a dependable robotic floor scrubber without that monitoring layer, the CC1 is the straightforward choice. Watch the CC1 cleaning on the floor to see it work.
PUDU CC1 price and financing
The PUDU CC1 has a purchase MSRP of $22,000, and the CC1 Pro is $24,000, both listed on our robot pricing page. Prices do not include installation or accessories such as the optional Self-Cleaning Docking Station, and installation is quoted for your site. Financing is available and you own the robot from day one, with Tovrana preparing the complete package your lender needs; see how financing works. To weigh the CC1 against the other robotic scrubbers, see our autonomous floor scrubbers guide.